Step 1.   Now comes the fun stuff! Rivet the HS-1004 ribs to the HS-1016.  Make sure the
HS-1016 flanges are pointing in the right direction!

10/23/05  -  1 hour

Step 2.   I didn't get a picture of this, so the one shown here will have to do.  Rivet the two sets of HS-1014 and HS-1015 stringers together and to the HS-1016. 

I used a vise to hold the HS-1014 and HS-1015 while riveting, once they were clecoed together.  Very easy to do.   

10/23/05  -  1 hour