| Home | > | Empennage | > | VS |
| << Previous | Page 6-5 (2 hours) | Next >> |
 |
Steps 1 & 2. The VS-1012 is riveted to the VS-1003, as is the VS-1015. |
| Step 3 - The VS skeleton takes shape in this step. Just don't forget to leave the VS-1005 and VS-1004 clecoed. You'll need to remove these when you begin riveting the skins. |
 |
| << Previous | Page 6-5 | Next >> |
| | | 6-2 | | | 6-3 | | | 6-4 | | | 6-5 | | | 6-6 | | |
| © 2006 Pider-Air |
| Send comments or corrections to the guy in the top left corner |
| jjessen at rcn dot com |