| Home | Problem Pages |
| << Previous | Problems - Page 3 |
Next >> |
| Problem Type: | Lack of a Radius on nose ribs |
| Where Found: | VS - Riveting skins to the skeleton. |
| Description: | No mention of radiusing the VS nose ribs as there is for the HS |
| Solution: | Turn to the HS section and follow directions there for the VS nose ribs |
|
This is simple. They forgot to mention that you need to radius the nose ribs a little on the forward edge where the flange meets the web. Draw a mark that looks about right and do this on the scotch brite wheel. Check the instructions in the HS section to make sure you understand what to do. Pictures below are from both the VS and HS albums. |
 |
 |
 |
| Problems pages are devoted to building or plans issues I've run into, either those of my doing, or those of Van's. Tim Olson has been trying to keep track of issues on his web site that others have fed him, so you might go there to get a more complete list. |
| << Previous | Problems - Page 3 |
Next >> |
| © 2008 Pider-Air |
| Send comments or corrections to the guy in the top left corner |
| n212pj at gmail dot com |